Quickly: PetSafe PIF-300 Overview
Dependable and powerful signal
Greatest option on a price range
Comfy receiver collar
Well-performing correction method
Remarkably simple setup
PetSafe PIF-300 Review
Is designed for only up to two dogs
In case you are somebody with limited funds, it is the perfect wireless fence to suit your needs.
Bundle Components and Add-Ons
You are welcomed to the PetSafe PIF-300 Wireless Dog Fence Overview. Beneath is the listing of all components we got with our pack:
The PIF-300 Transmission device / Command Unit
Electrical power adapter for the transmitter
Collar with receiver component
A set of two long and also two shorter contact points
50 boundary teaching flags
1 PetSafe RFA-67 receiver electric battery
Guarantee: Lifelong (restricted)
Paper operation, setup and dog coaching guide
Collar Power Supply
The battery for the PIF-300 collar receiver should be replaced and can not be charged again; it will function for about two to three months, dependant upon your dog’s nature and how frequently he challenges the containment borders. Although replaceable electric batteries are not as handy as a rechargeable receiver, they do possess a substantial benefit: in case the battery was to breakdown, you can substitute it by hand – this is not feasible on a rechargeable receiver, because they feature integrated batteries which can be taken out by a certified support representative only. The receiver operates with PetSafe’s 6 volt Lithium electric battery (RFA-67), which can be bought for about 7.5 dollars for a package of a pair.
Sadly the PetSafe PIF-300 doesn’t include a probe wrench, thus you will need to screw them in as well as unscrew them manually. This is not a big challenge, but be cautious to do it carefully so the probes don’t drill into your fingertips, and at the same time to examine regularly that the probes continue to be screwed in tightly, because they have a tendency to loosen up a bit after a few days of usage, particularly if you pet likes to run all over as well as jump a lot (which doggy does not love this?). It may be a good option to apply pliers to fix and take off the probes as well.
Collar Test Light
The test light that is included with the PetSafe PIF-300 differs from what you receive with the Safe & Play product, for instance. Instead of having to just take the tester close to the receiver in order to check if it’s functioning, you will have to connect the tester wires (leads) under the contact points; in case the receiver is functioning correctly and a working battery pack is put in, the tester light will flash every time the receiver gets closer to the bounds. Apply this to locate the precise spots where the boundary flags ought to be placed for teaching your dog using visual cues.
Long or short contact points
Just like with most of high-quality wireless dog fences, the PIF-300 bundle includes 2 sets of contact points: long and also short versions. Your selection of which set to apply will be identified by how long as well as thick your pet’s hair is close to the neck area; in case it is long and also thick, make use of the longer contact points. If it is short and thin, apply the short ones.
Limited Lifelong Guaranty
PetSafe gives a limited lifetime guaranty for all of their wireless pet fences. “Limited” in this instance would mean the next: you receive a full one-year long guaranty, and after that you receive a lifelong major price cut on all fixes which might require to be executed in case of a receiver or transmitter breakdown of any kinds.
The PetSafe Transmitter
The PIF-300 transmission device is quite big (9 inches (L) by 9.1 inches (W) by 8.9 inches (D). It demands to be attached to an external wall within your house, on the ground floor about 4 to 5 ft from the floor. Ensure to maintain any metallic items no less than 3 (and if possible 5) ft far from the transmitter to reduce signal interferences. Keep in mind the transmitter will produce a radio signal in a nearly ideal circle, thus anywhere it’s set up will tag the center of the containment circle (the Pet Spot).
Similar to all cordless transmitters, you can both put it on top of a desk, or attach it to a wall making use of the bundled back assemblage. If you put it on a desk or some other object, ensure that the item is not produced from iron, as well as that nothing is put on the top of the transmitter (not any keys, papers, and so on.). At the same time, the transmitter should stay in an upside position all the time.
The PIF-300 transmitter will be able to contain your pet in a ring with a diameter of up to 180 ft radius, equaling to approximately 1/2 acre. There are just 3 controls offered on the transmitter:
The On/ Off control key
The boundary signal power button. You can switch it to either LOW or HIGH. Use the first in case you wish to set up a containment spot with a 90 feet diameter or less or apply the second option if you need a bigger containment space (diameter of 90 to 180 feet).
The boundary control switch-dial. It can be fixed to a value from 1 to 8; the larger the value is, the larger sized the containment area will be. Remember that how much further you expand the boundary having every turn of the control will rely upon whether you have set the transmission power switch to LOW or HIGH.
Concerning the previous issue, please refer to the guide information for a better knowing of what every of the 8 adjustments will do, for the two LOW and HIGH signal power setting.
The PetSafe PIF-300 provides bit worse boundary stability compared to the PetSafe Stay & Play as well as the Havahart Radial 2 products. At the highest setting (180 ft circle diameter), you may be expecting the border to stagger around 3 ft in every direction; thus a setting of 180 ft will, in fact, be between 177 and 183 ft in real circumstances. This signal instability is substantially minimized in case your containment spot is smaller than 180 ft in diameter. In general, I think of this a quite stable wireless fence, although the other 2 products we have examined here tend to be a bit more stable.
The PIF-300, similar to all the PetSafe wireless models, can support an unrestricted amount of pets with no need to buy extra transmitters. You can purchase as many dog collars as you require at a general of 90 dollars/ collar and all of them will work flawlessly good.
If you want to deal with a larger sized or non-circle shaped spot, you can purchase an extra transmitter and get the two work simultaneously, letting you to contain your pet in a space similar to an “8” form, as well as something closer to a quadrangle.
The PIF-300 Receiver Collar
The receiver collar will suit every dog having a neck size of 6 inches to 23 inches. The short contact points are set up by standard, and you will probably need to apply a wrench in case you wish to substitute them with the longer couple.
There are 6 correction levels offered: the first is the beep only, and the other 5 are a beep plus 1 of 5 static correction settings. By default, the receiver on the collar will be arranged to “1” (beep-only). To modify the correction level, apply a coin or a screwdriver to take away the little plastic safety cap which hides the Correction Level Button, after that push the button one time till the LED is lighted – it can flash between one and six times, showing the presently set correction level. To alter the level, just press the control key as many times as necessary; thus a switch from level 1 to level 3 will demand two pushes of the button, and so on. In case, the level is fixed to 6 and you push the button, it will go around and return to level 1.
Please ensure that there is a charged electric battery put in the receiver prior to you effort to modify the correction level.
The PIF-300 is included with a PetSafe 6 volt RFA-67 battery, which lasts for up to three months of usage and expenses less than 4 dollars an item. You do not have to open any tray to put in the battery; PetSafe developed the batteries for effortless installing, and you can quite simply screw them directly into the receiver applying a coin as well as a flat head screwdriver. Ensure that you at all times have a minimum of 1 spare battery accessible. Any time the receiver light begins blinking red one time every 5 secs, this will show a low battery and you will need to change it as soon as possible.
If your dog tried to approach the containment area boundary and not got away regardless of a static correction being provided, the receiver will quit correcting your pet after about half a minute to prevent stressing out your dog for a more time than required.
Dog Training and Detailed Settings
As soon as the system is set up and prepared for usage, you will have to train your pet. Please take a look at in-depth step by step guides on how to carry out that correctly and with no over-stressing your dog.
PetSafe PIF-300 Overview – Synopsis
A fantastic buy for any person with limited funds; in terms of wireless dog fences in the “under 250 dollars array”, you will not get anything more beneficial than the PetSafe PIF-300. Amazon’s superb price cut and free delivery help to make it an even better option.
Latest posts by Marta Miller (see all)
- PetSafe Stubborn Dog Fence Review - October 11, 2015
- PetSafe Stay and Play Wireless Dog Fence Review - October 11, 2015
- PetSafe PIF-300 Review – Wireless Dog Fence Check Up - October 11, 2015