What is the best wire for an underground dog fence? This question has been asked over and over again by many pet owners. Some people want to buy wire for their dog fencing, while others want to know which company provides the best wire for their clients. We will answer this question and more in our comprehensive guide about wires.
A wire is the main component of an underground dog fence. It transmits signals from a transmitter to your pet’s collar or harness that sends him negative electrical impulses when he gets too close to the boundary line. There are different types of wire for you to choose from, but each has its advantages and disadvantages. And some companies offer more than one type of wire in their systems! This factor can sometimes confuse determining which product will work best for your needs, so we hope this article helps you find what works best for you and your pup! Before continuing with our guide, please keep in mind that not all brands use wires as part of their system, made possible by using radio frequencies instead. Some companies even have wireless products that use invisible fencing.
The wire is an integral part of any underground dog fence. It transmits signals from the transmitter to the collar or harness and runs along your boundary line. This means that once you set up your system if this component fails (breaks), it will need replacing as soon as possible for optimal performance! Also, keep in mind that some companies offer lifetime warranties on their wires. If you are experiencing issues with a certain section of wire, contact them immediately so they can send out replacement parts at no extra cost!
It’s also important to consider how much space you have to build your containment area when choosing different wires because each comes with its range specifications. Some products even come with multiple lines allowing for unique custom-made setups within your property.
Best wire for underground dog fence reviewed
How To Choose the Best Wire For Underground Dog Fence
This is the most significant and most common gauge wire used for underground dog fence boundary wiring. Still, it can be incredibly difficult to work with due to how stiff & inflexible it tends to be compared with other types, making installation a million times more tedious than usual.
As far as standard gauges go, 16 works just fine when it comes down to running power from an outlet through solid core wire without any problems whatsoever; there are issues, though, such as signal loss or interference after extended periods outside in winter weather despite being much easier on your wallet upfront!
If you’re looking for a middle ground between strength/durability & affordability, then boundary wires made from this type of wire is the way to go; they’re not nearly as sturdy or durable as stainless steel varieties, but they do cost a lot less and work just fine for most people unless you live in an extremely cold climate…otherwise stick with lower gauge choices!
Lastly, we have this type that many companies don’t use because it’s made from multiple conductive cores instead of solid core wiring. This makes installation incredibly easy due to its flexibility compared with other types listed here despite being quite pricey overall & only lasting a few years before needing replacement, unlike aluminum/stainless steel wires that can last upwards of 15+ years depending on your specific needs.
If you are adding wire to an existing dog fence, make sure it’s the same gauge as before. Mixing gauges is not recommended because this will cause inconsistent signals and other problems with the electronic transmission. For large properties with numerous acres, a thicker gauge can sometimes help increase signal range for better coverage overall.
Compatibility Of Different Wire With Different Fence Systems/Products
This is a tricky one to answer for two main reasons:
Firstly, you must use wire from the same manufacturer as your underground dog fence to ensure compatibility between both parts. If they don’t match, then signals will be mixed up or completely unintelligible, which can lead to some very frustrating problems with your system!
Secondly, even if you do stick with the exact type recommended by your original provider, there are still many factors involved, such as whether or not these wires have been buried deep enough so keep this in mind while checking out our best wire for underground dog fence guide today!
Types Of Wire For Underground Dog Fences
There are various types and thicknesses for underground dog fence boundary wire, so it’s essential to understand what they all entail before making a purchase.
- Twisted Wire: this is the most common type found within electronic containment systems; they consist of two bare copper wires that have been twisted together to create one long cable capable of transmitting an audio signal when attached to power. Twisted wire comes in pet-safe variants as well, which use polyethylene (plastic). It can be used both above ground and under, depending on your needs! Keep in mind that you’ll need at least two lines running from each unit throughout your house if using them underneath instead because not doing so will cause any signals generated by electricity running through these wires to be shorted out.
- Solid Core Wire: this type consists of a single solid copper wire that can transmit power and audio signals without any problems whatsoever once attached to both voltage and additional cables running throughout the yard! The only downside is how fragile it tends to be compared with twisted varieties, but if you’re looking for something extremely durable, then solid core may well be your best bet by far! It’s ideal not because its sturdiness allows for more powerful transmissions (which are already pretty darn strong as they are), but due to the fact that it has no issues being buried underground, unlike other types, which usually suffer from signal loss or interference after extended periods outside in winter weather.
- Aluminum Wire: much like standard steel wiring, aluminum wire is very sturdy for its cost/size ratio, but it tends to be more flexible than solid-core varieties, which may or may not cause issues depending on your specific needs. It’s also a lot less expensive in the long run compared with other options on this list due to how much longer it lasts before needing replacement, so if you’re looking for underground dog fence boundary wiring that won’t break the bank, then aluminum could well be what you need!
- Stainless Steel Wire: being one of the high-quality materials typically reserved only for wealthy homeowners who are willing & able to spend upwards of $100-$200 per 100ft spool doesn’t mean stainless steel is overkill by any stretch of the word; quite contrary actually because these cables can last upwards of 20 years before needing replacement rather than just five or six. While the cost may be prohibitive to some, stainless steel wire is worth its weight in gold when it comes down to it because many other types aren’t made with nearly as much care & attention during production!
- Multi-Core Wire: this type uses two different cables that can transmit both power and audio signals without any issues whatsoever; one cable runs along either side while a solid copper center transmits everything your dog needs for their collar receiver(s) attached around their neck at all times which is convenient overall. Unfortunately, multi-core wires tend not to last very long at all, so they’re usually only reserved for small jobs such as those which require repairs on an existing wire that has degraded for whatever reason.
- Boundary Wire: this type of underground dog fence boundary wiring is relatively new on the market, so it’s not used by many providers at all; what makes these cables unique compared to others listed here is their ability to transmit power and audio signals through a single cable instead of two separate wires! While there are some concerns about whether or not they’ll last under normal circumstances, these have been proven in testing to work just fine even after being buried for extended periods without issues whatsoever which can’t be said for most other types found within D.I.Y. electronic containment systems…check out our full guide to best wire for underground dog fence today!
How to replace a wire for an underground dog fence with a new one
Step by step:
- Make sure your dog is not wearing his collar or harness.
- Disconnect the battery from the transmitter if you have a wireless system. Some systems require it to remain plugged in, so make sure you check with your manufacturer before disconnecting it! Most underground pet fences connect to the main unit using wire cables, all of which plug into an electrical outlet for power. Still, some are rechargeable batteries that are either built into collars or attach separately.
- Once disconnected, turn off any nearby transmitters (if applicable) by turning their dials until they reach zero. This will ensure there’s no interference while you work on replacing anything within your fence line! If this step does not apply to you because your units use radio frequencies instead, you can ignore this step.
- Remove the wire from your boundary line or where it meets up with a splitter box (if applicable) by carefully pulling on both ends of the section in question. Make sure to pick a spot as close to any splitters as possible so that your new wire will be long enough! You may want to use pliers for added leverage depending on how loose they are, but make sure not to damage them if at all possible.
- Disconnect and remove either end of the old wire from each unit along its path until you reach the transmitter plug or battery within your main base station area. Keep all damaged pieces together in case anything is missing upon the arrival of a replacement product(s). Check out our store for replacement wires!
- Once all pieces are removed, you can either dispose of the old wire or keep it if any issues arise with your new one. We recommend keeping it around rather than throwing away something that could potentially be useful later on down the road if needed!
- Now, connect both ends of each section of your new wire to its corresponding transmitter plug within your main base unit area and battery (if applicable). Keep in mind that most systems require at least two lines running from their bases to function properly; one line runs into the ground while another goes up alongside this first cable. If there is only a single line coming out from beneath the surface, you may want to consider adding more cables instead. This will allow you to determine your boundary lines more accurately because there will be no risk of the system shorting out!
- If using a wireless transmitter, plug it back in and make sure all dials are turned down. This ensures that any old signals left behind by the previous wire’s setup have not been picked up or interrupted by new ones now running through your property (this would cause false triggers). Turn on electricity again if applicable.
- Test outside with an actual dog wearing his contact points for added accuracy. Ensure everything is working properly before allowing dogs inside the containment area without their contacts/harnesses attached!
Replacing wires can occasionally become necessary depending on how much damage has occurred along set paths throughout one’s yard or where they meet up with splitter boxes if applicable. It’s a good idea to keep your old wire in case any issues arise with the new one, but make sure it stays away from pet areas because dogs can chew through anything that seems remotely like food! While this may seem daunting or time-consuming at first glance, most electronic dog fence systems are very easy and fast to work on when necessary. The same goes for replacement wires; match them up along their entire length until you reach each plug within your main base station area and battery (if applicable).